Page
Rev. 3
10
C.3 TX Indicator
When the radio is transmitting, the “TX” icon will be lit up.
D. EUROPEAN KEY OPERATION
Most of the functions in the radio are the same as the US model. These are the functions
that work differently.
D.1 Programming ATIS ID
ATIS function only exists in European Model. Therefore, it only functions when the
European radio is tuned to the International Frequency Group. After ATIS ID is being
programmed into the radio via the keypad or the cloning software, the ATIS function will be
enabled all the time. The user cannot disable it.
To enable the customer to enter ATID ID into the radio from the keypad, the check box next to
the ATIS entry by user on the Cloning software has to be ticked.
Programming ATIS ID from the Keypad
1. Programming start with the radio turn OFF.
2. Long press Hi/Lo/Lock and turn radio ON to access the ATIS mode.
3. The front digit will indicate the digit position of the ATIS ID. The rear digit will blink
continuously. The rear digit indicates the ATIS ID. Changing the value of the rear digit
can be achieved using the “UP/DOWN” Key.
4. Press “MEM” key to confirm the selection and move to the next digit.
5. After the user complete the 9 digit ATIS ID, the user has to enter the ATIS ID the second
time to avoid invalid entry. If different ATIS ID is entered, operation will be canceled The
user has to repeat step one to initiate the ATID ID entering sequence.
6. The operating procedure to enter a valid ATID ID for the second time is same as the first
time, the ATIS ID will be flashed in sequence one time on the screen.
