HIMS Inc.
BookSense XT – User Manual
2) Then “Currently at ##%. Enter a percent value between 0 and 99, edit box” is
announced, and enter the number from 0 to 99.
3) Press the OK button. It will move to the location of percent.
If you enter the number bigger than 99, then BookSense says “Entered value is not valid.
Please enter a value between 0 and 99, edit box.” And you need to enter valid number. To
cancel moving by percent, press the CANCEL button in step 2 before entering the number.
Or press the CANCEL button instead of the OK button in step 3; to delete all numbers you
have entered, press the CANCEL button until you have deleted all numbers. After all
numbers have been deleted, you will hear a ding. Then, press the CANCEL again to close
the edit box. Note that the CANCEL button acts as a backspace key and you cannot cancel
out of an edit box until you delete all numbers.
6.19 Undo & Redo in Document Reader
Pressing the LEFT button for more than 2 seconds will “undo” the operation and return you
to the last position before acting something. And pressing the RIGHT button for more than 2
seconds will “redo” the operation and return you to the position before acting “undo.” When
you move to change the unit to move by; moving to a page/sentence/line/sentence/word/
character/phonetic/mark undo will work by pressing the LEFT button for more than 2
seconds. Undo & Redo allows you to do only 3 times.
Note: Undo and redo will not work in the Radio.
Note: In the document reader, moving by line, sentence, word, character, phonetic will not
work either.
6.20 Checking the Status of Content Information
If you want to check the status of content information while playing, press number 0 button.
This allows you to check the file name, current page, total mark, total voice memo, and
percent of current playing file. To press number 0 button while playing, it is announced the
status of content information and return to current location. To cancel, press the CANCEL
button.
6.21 Using Menu in the Document Reader
To access the menu while in the Document Reader, press the MENU button while in the
Document Reader. You will see the following in the menu: Switch to Recent Documents list,
Mark Info (only while reading a file or in a pause status), Page Settings (only in the
57
