2
Specification
Adjusting torque
The dials on the electric screwdriver do not represent the
torque value.
Please use the torque/dial table to set the proper dial for each
different machine type and set to the desired torque for
operations.
To ensure the precision of the torque value, we recommend the
use of the HIMAX torque tester to measure and calibrae
Parts List
TL-2000/TL-3000
No. Description
No. Description
1. Coupling
36. Motor Assembly
2. *
37. Magnet Supporter
3. Torque Adjusting Nut
38. Magnet
4. Roller Pin
39. Washer
5. Torque Adj. Bolt
40. Motor Front Cover
6. Torque Adj. Spring
41. *
7. Spring Lower Holder
42. Carbon Brush
8. Ground Connection
43. Carbon Brush Cap
9. Collar Stopper Ring
44. Capacitance
10. Bit Holder Collar
45. Motor Bearing
11. Collar Spring
46. Rotor
12. Bit Lock Ball
47. Frame A
13. Joint Shaft
48. Frame B
14. Joint Shaft Lock Pin
49. Screw
15. Screw
50. Switch Lever
16. Spring Upper Holder
51. Switch Lever Spring
17. Thrust Bearing
52. Switch Lever plunger
18. Clutch Ball Rod
53. Roller Bearing
19. Clutch Ball
54. Name Plate
20. Switch Supporter
55. *
21. Gear Case
56. For/Rev Switch
22. Screw
57. Starting Switch
23. Micro Switch
58. 5P Connector
24. Internal Gear
59. Hanger
25. Cam Roller
60.
26. Driving Shaft
61. Driver Cord
27. Planet Gear
28. Bearing
29. Washer
30. Gear Pin
31. Gear Base
32. Rotor Gear
33. Oil Seal Plate
34. Assembling Spring
35. Motor End Cover
