HIMA HIMax X-DO 12 01, Руководство пользователя, Страница: 41 / 52

X-DO 12 01 5 Operation
HI 801 023 E Rev. 5.00 Page 41 of 52
5 Operation
The module runs within a HIMax base plate and does not require any specific monitoring.
5.1 Handling
Direct handling of the module is not foreseen.
The module is operated from within the PADT, e.g., for forcing the outputs. For more details,
refer to the SILworX documentation.
5.2 Diagnosis
LEDs on the front side of the module indicate the module state, see Chapter 3.4.2.
The diagnostic history of the relay module can also be read using the programming tool
SILworX. Chapter 4.3.4 and Chapter 4.3.5 describe the most important diagnostic messages.
i
If a module is plugged in to a base plate, it generates diagnostic messages during its
initialization phase indicating faults such as incorrect voltage values.
These messages only indicate a module fault if they occur after the system starts operation.