DIO 24/16 01
6 Maintenance
HI 800 205 E Rev. 1.01
Page 29 of 40
6 Maintenance
No maintenance measures are required during normal operation.
If a device or module fails, it must be replaced with a faultless device or module of the
same type or with an approved replacement model.
Only the manufacturer is authorized to repair the device/module.
6.1 Faults
Refer to Chapter 3.1.1.1, for more information on the fault reaction of inputs.
Refer to Chapter 3.1.2.1, for more information on the fault reaction of the outputs.
NOTE
If a failure occurs, the module must be replaced to ensure the plant's safety.
A module may only be replaced while the power is switched off.
i
Modules may not be removed or inserted during operation.
The instructions specified in Chapter 4.1.1 must be observed when replacing an existing
module or installing a new one.