manualshive.com logo in svg

Hiltron XR400GSM, Инструкция по установке и использованию, Страница: 50 / 64

Поделиться
Скачать
Hiltron XR400GSM Скачать руководство пользователя страница 50

6.3.2 Disconnection

From the panel or from console it’s necessary dial the USER code, to select the menu :

Press the button           or

or   dial   the USER code 

During this operation, the ventual flashing of the yellow LED, indicates that is current the delay of entry 
after the opening of a delayed zone and that doesn’t disconnect in the maximal programmed time,will be 
activated a round of alarm.
The LED “ALARM MEMORY ” flashing if verificate a round of alarm during the time of monitoring of the 
central unit. 

The disconnection of the central unit it’s possible also from voice menu with access from the panel of the 
central or from remote through telephone connection.Inboth cases , after dial user code, dial          to 
disconnection.

6.3.3   Stop alarm

In the case of alarm it’s possible to stop the acoustic signal and to stop the calls:

from the panel of the central unit  or from a console dial the COMMANDS and to select the menu :

Confirm with the button           or        . 

This command doesn’t connect the burglar alarm system. 
The command of connection/disconnection from the panel and from external command devices (PX, SK, 
KB) stops the round of alarm and disconnect  the central unit. (In the case of alarm 24h at central 
disconnected,the connection command  resets signals, but doesn’t connect the central unit .

D i s a r m e d
0 - D I S C O N N E C T I O N

1 - S t o p  R O U N D

  T o t    A l a r m

I N S    D I S A B L E D

S e r v . P r o v .  E N

0

0

security

50

6.3.4   Activation exit

When the exit is programmed  to operating to “Command ON/OFF” (see the paragraph 3.3.21) it’s 
possible to command the exit from the panel and from the console or from the telephone.

Dial on thje panel of the central unit the USER code followed by                :

On the display appear:

To modificate the state of  exit dial          and on the display appear:

Dial now           to come back to initial condition.

This operation can be executed also through Voice menu .

Dial         to activate the voice menu  and after the USER code,        ,       .

Dial         to activate the exit ,or         to disactivate. 

Similar connecting through phone line after inserted the commands code dial on the phone pad

        to “activation exit” and to execute the voice indications.

NOTE: if you program “Function OUT + INT" = "ON on connected” the exit + INT indicates the status 

conencted/disconnected  of the central unit  and cannot be commanded independently.

6

7  = O N              9 = O F F

O U T :  D i s a b l e d

7

7  = O N              9 = O F F

O U T :  D i s a b l e d

9

6

7

9

6

security

Use of the central unit 

51

XR400GSM

 - XR

800GSM -  Installation guide and use

Содержание XR400GSM

































































Отзывы:

Нет отзывов