3
Programmation
It is possible to operate the menus in two different modes:
!
using the keys:
or
!
fino a visualizzare la voce desiderata
for example:
!
and pressing:
or
or
!
using the fast selection button:
(Programming)
NOTE In the manual, in most cases, the fast selection key method will be
used. In this manner, during the consultation of the manual, it will be
possible to utilise the sequence of keys beside each Paragraph to
quickly access the programming described within..
Once installation has been carried out and the combiner has been powered up,
select the desired language using
the
or
and press the
or
.
The available languages are:
This is valid for both the Principal Menu, to access any submenu, and within any
of the various submenus, where it is moreover possible to utilise the fast selection
keys to select a given parameter, a given system, and so on.
It is possible in any case to abandon programming by keying
or
#
Italian
#
English
#
French
#
Spanish
#
Portuguese
#
German
R e a d y _ . . . . . . . . .
8 - P R O G R A M M I N G
6
TD96 / TM96P - User manual
7
When on standby mode, having selected the combiner language, the TD96 and
TM96P combiners display the status of the two input channels (CH1 is enabled and
CH2 is disabled by default) in rotation.
!
This will be displayed:
which alternates with
In order to function, the combiner requires at least one telephone number in the
Voice Directory, and it is also necessary to have at least one Voice Message
recorded. Indeed, the item “CH1 Directory OFF” indicates that once the telephone
numbers in the directory have been assigned, it is then necessary to associate each
number to CH1 or Ch2.
3.1
Accessing
programming
Programming of the combiner is only permitted from the local keyboard by keying
the
MASTER
code.
( )
!
Key in the code:
(Default MASTER code)
!
Press the button:
(Programming)
!
This will be displayed:
Programming of the combiner allows for:
!
Voice Directory
16 telephone numbers to which the
Voice Messages
will be forwarded
!
Voice Messages
3 of 11 seconds (common message, channel 1, channel 2) + 12 status messages
of 2 seconds each.
!
Text messages
Input and output status descriptions
!
Channels
Input, conditions and activation delay settings
!
Outputs
Output settings
!
Parameters
The function parameters of the combiner are set out in this section.
!
Codes
Variation of the
MASTER code
and
COMMAND code
!
Info
Display of information on the combiner model and the firmware.
R e a d y
. . . . . . . . . .
C H 1
R u b r i c
O f f
R e a d y
. . . . . . . . . .
C H 2
D i s a b l e d
P R O G R A M M I N G
1 - R u b r i c
Programmation
security
security
