hilton WK 9221, Руководство по эксплуатации

Страница: 12 / 17

GETTING STARTED
If you are using the kettle for the first time, it is recommended that you
clean your kettle before use by boiling a full kettle of water twice and
then discarding the water.
Note: for the water kettle, the max capacity is 1.7L.
OPERATION
1. To fill the kettle, remove it from the power base and open lid by
pressing lid button, fill with the desired amount of water. Alternatively,
the kettle may be filled through the spout. Always fill the kettle between
the minimum and maximum marks. too little water will result in the kettle
switching off before the water has boiled.
Note: Do not fill the water over the maximum level, as water may spill
out of the spout when boiling. Ensure that the lid is firmly in place before
placing the kettle on the power base.
2. Position the kettle on the power base. Connect the plug into a power
outlet.
3. Turn the Temperature knob to select the desired temperature. When
turning to the max position, it means to boil the water.
4. Press down the switch, the indicator will be illuminated. Then start
boiling the water. The water kettle will switch off automatically once the
water has been heated to the set temperature. If necessary, it will take
you 30 seconds to wait for before you press the switch again to re-boil
the water, you may shut off the power by lift up the switch or lift the kettle
from the power base at any moment to stop boiling process.
Note: Ensure that switch is clear of obstructions and the lid is
firmly closed, the kettle will not turn off if the switch is constrained
or if the lid is left open
.
5. Lift the kettle from the power base and then pour the water.
Caution!
Operate carefully when pouring the water from your kettle as
boiling water may result in scald, besides, don’t open the lid while
the water in the kettle is hot.
6. The kettle will not re-boil until the switch is pressed. The kettle may be
stored on the power base when not in use.
Note: Ensure the power is turned off while the kettle is not in use
Boil-dry protect
Should you accidentally allow the kettle to operate without water, the
boil-dry protection will automatically switch it off, If this should occur,
allow the kettle to cool before filling with cold water and re-boiling.