hilton HSM 1003, Руководство по эксплуатации

Страница: 24 / 26

5. Step 4 - the tip
Using Nozzles length of 9 or 12 mm Shear top, moving
machine forward, in the direction opposite of hair growth
(Fig. 4). In some cases you may need cutting back.
For a short haircut, haircuts "hedgehog" use
attachments length 3 or 6 mm.
To keep on top of the longer hair, use a comb that
comes with the machine. Lift with the help of hair on top.
Cut the top of the comb with raised hair, or hold the hair between the
toes and trim them (Figure 5.6). Mow from the neck to the forehead.
Reducing the distance between the head and comb, you can gradually
make the hair shorter and shorter. Comb cut hair and checks if there are
any uneven strands.
6. Step 5 - the final part
To trim the hair on the base of the neck and around
the ears, use a cone-shaped lever
To get a straight line of tanks, turn the machine so
that the back side facing up (Fig. 7).
Press the machine at right angles to the head so
that the tips of the blades lightly touching the skin
and enter the machine down.
STYLES
Butch "flat top" and "classic"
Using the nozzle for long hair (12 mm), cut the hair
growing on the back of the neck, and head to the
top. Hold the device exactly to your head and slowly
move the clipper through the hair (Fig. 8).
You can also cut the bottom of the top of the head
(Fig. 8). Next, trim the hair against their growth,
moving from the forehead to the crown, and then
trim haircut on the sides.
To give the head form a "flat top" cut hair flat on top.
For cutting hair on the neck of their restriction to the
gate and use the device for shorter hair. Comb your
hair and check for uneven areas and protruding hair,
as described above.
eng