30
English
2326117
*2326117*
8. Close the filter cassette by flipping the cover catch forward.
9. Close the safety retainer for the filter cassette.
10. Be sure to remove the dust that escapes from the vacuum cleaner and/or the filter element due to the
filter change operation.
8.4
Checking the container level monitoring system
1. Disconnect the supply cord plug from the power outlet.
2. Open the two catches.
3. Lift the vacuum cleaner top section away from the waste material container and place it on a level surface.
4. Check the cut-off contacts (wire sensors) for dirt accretions and if necessary, brush the contacts clean.
5. Check the seal at the vacuum cleaner top section and clean it with a cloth if necessary.
6. Position the vacuum cleaner top section on top of the waste material container.
7. Close the two catches.
8. Check to ensure that the vacuum cleaner top section is installed correctly and secured.
8.5
Checks after cleaning and maintenance
1. After cleaning or carrying out maintenance, check that the vacuum cleaner is assembled correctly and
that it functions faultlessly.
2. Test each of the functions.
9
Transport and storage
9.1
Transport
Do not carry the vacuum cleaner when the waste material container is full.
Do not attempt to crane-lift the vacuum cleaner.
▶
Remove the power conditioner and all loose accessory tools from the cradle.
▶
Empty the vacuum cleaner before the vacuum cleaner is to be carried to another location.
▶
After using it to vacuum up liquids, do not tilt the vacuum cleaner and transport the vacuum cleaner in
the upright position only.
▶
Use the tapered adapter to connect both ends of the hose together conveniently for transport.
H-class vacuum cleaners
WARNING
Risk of injury by dusts that are hazardous to health!
Hazardous material that has been vacuumed up can
escape through the suction hose intake fitting.
▶
Close the intake fitting on a class H vacuum cleaner with the cap provided before transportation and
when the vacuum cleaner is not in use.
Safety instructions for dust-free transportation
The following measures must be implemented for dust-free transportation:
▶
Place the suction hose in the transport bag provided for the purpose and seal the transport bag.
▶
Seal the suction intake.
▶
Remove the suction tube with floor nozzle from the holder. Carry the vacuum cleaner by the carrying
handle and the suction tube, not the pushbar.
9.2
Securing cases
1. Make sure that the vacuum cleaner is standing firmly and apply the holding brake. Pull the transport
handle all the way out.
2. Position one or more cases on the vacuum cleaner.
▶
It is not permissible for the case/cases to project above the transport handle.
▶
Do not exceed the maximum permissible weight for additional load.
3. Pull the lashing strap out of the holder and over the cases. Extend the lashing strap as necessary.
4. Engage the hook of the lashing strap on the transport handle and tighten the lashing strap.
9.3
Storage
▶
Store the vacuum cleaner in a secure, dry place where it is inaccessible to unauthorized users.
Содержание VC 20H-X
