Hilti te6-a, Руководство по эксплуатации

Страница: 9 / 14

4
Maintain tools with care. Keep cutting tools sharp and
clean.
Properly maintained tools with sharp cutting edge are
less likely to bind and are easier to control.
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool’s operation. If damaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the
manufacturer for your model.
Accessories that may be suitable for one tool may cre-
ate a risk of injury when used on another tool.
Service
Tool service must be performed only be qualified repair
personnel.
Service or maintenance performed by unqualified per-
sonnel may result in a risk of injury.
When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section
of this manual.
Use of unauthorized parts or failure to follow Mainte-
nance Instructions may create a risk of shock or injury.
Specific Safety Rules and Symbols
Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may con-
tact hidden wiring.
Contact with a “live” wire will make exposed metal parts
of the tool “live” and shock the operator.
Wear ear protectors when using the tool for extended
periods.
Prolonged exposure to high intensity noise can cause
hearing loss.
V volts
direct current
no no load speed
…/min revolutions or reciprocation per minute
The tool is designed for the following uses:
Use
Drilling in concrete, masonry and
natural stone
Setting anchors
Drilling in wood and metal
Using hole saws in wood, plastic,
tiles and masonry
Required insert tool
Drill bit with TE-C connection end
Anchor setting tool with TE-C
connection end
Quick-release chuck or key-type
chuck
Quick-release chuck or key-type
chuck
Diameter range
Drilling in concrete: up to
5 /
8
″
dia.
All Hilti anchors with TE-C setting
tools
Wood drill bits up to
3 /
4
″
dia.
TE-HS hole saws 1
″
up to 4 5 /
16
″
dia.
Functional description
The TE 6-A is a cordless, battery-powered, rotary hammer drill with pneumatic hammering mechanism designed
for professional use.