Hilti TE 800, Руководство по эксплуатации

Страница: 20 / 180

16 English 2064795
*2064795*
Status Meaning
The power level indicator lights. Chiseling power is reduced to 70%. Press the
power level selector switch again to return to full
chiseling power. The chiseling power level can be
adjusted only when the tool is plugged in to the
electric supply.
3.6 Items supplied
Breaker, side handle, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4 Technical data
4.1 Breaker
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool’s
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be 5% and -15% of the rated voltage of the power tool.
TE 800 TE 800­AVR
Rated power input 1,850 W 1,850 W
Single impact energy in accordance with EPTA proce-
dure 05
21 J 21 J
Weight in accordance with EPTA procedure 01 10.5 kg 10.6 kg
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Sound (power) level (L
WA
) 98 dB(A)
Uncertainty for the sound power level (K
WA
) 3 dB(A)
Emission sound pressure level (L
pA
) 87 dB(A)
Uncertainty for the sound pressure level (K
pA
) 3 dB(A)
Information about vibration
TE 800 TE 800­AVR
Chiseling (a
h, Cheq
)
16 m/s² 8 m/s²
Uncertainty (K) 1.5 m/s² 1.5 m/s²