![background image](http://html.mh-extra.com/html/hilti/te-3-cl/te-3-cl_original-operating-inctructions_2135375011.webp)
*2121692*
2121692
English
5
3
Description
3.1
Parts of the tool and operating controls
@
Three-jaw chuck (TE 3-ML)
;
SDS quick-release chuck
=
Chuck locking ring
%
Connection for the dust collection module
&
Depth gauge
(
Forward / reverse switch
)
Control switch lock
+
Control switch
§
Supply cord
/
Function selector switch
:
Depth gauge release button
∙
Side handle
3.2
Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry, drywall / gypsum board, plastic, wood, metal and for driving and removing screws. The product
can also be used for light chiseling work on masonry and surface finishing on concrete.
Hilti
products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product described and its ancillary equipment may present hazards when used incorrectly
by untrained personnel or when used not as directed.
▶
The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type plate.
▶
Observe the national health and safety requirements.
▶
To reduce the risk of injury, use only genuine
Hilti
tools and accessories.
3.3
Examples of applications
The applications shown are possible.
3.4
Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
For safe, reliable operation, use only genuine Hilti spare parts and accessories. Spare parts,
accessories and consumables approved by Hilti for use with this product can be found at your
Hilti
Center or at
www.hilti.group
.
4
Technical data
4.1
Technical data
When powered by a generator or transformer, the generator or transformer’s power output must be at
least twice the rated input power shown on the rating plate of the electric tool. The operating voltage
of the transformer or generator must always be 5% and -15% of the rated voltage of the
electric tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of deviations
from the rated voltage and for country-specific versions. Please refer to the electric tool’s type
identification plate for details of its voltage, frequency, current and input power ratings.
TE 3-ML
TE 3-CL
Weight
3.1 kg
3.0 kg
Single impact energy
2.1 J
2.1 J
Printed: 07.01.2019 | Doc-Nr: PUB / 5279069 / 000 / 04
Содержание TE 3-CL
