Hilti SF4000-A, Руководство по эксплуатации

Страница: 9 / 17

3
affect the tool’s operation. If damaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the
manufacturer for your model.
Accessories that may be suitable for one tool may cre-
ate a risk of injury when used on another tool.
2.6 Service
Tool service must be performed only by qualified repair
personnel.
Service or maintenance performed by unqualified per-
sonnel may result in a risk of injury.
When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section
of this manual.
Use of unauthorized parts or failure to follow Mainte-
nance Instructions may create a risk of shock or injury.
3. SPECIFIC SAFETY RULES AND
SYMBOLS
Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may con-
tact hidden wiring.
Contact with a “live” wire will also make exposed metal
parts of the tool “live” and shock the operator.
WARNING: Some dust created by grinding, sanding,
cutting and drilling contains chemicals known to cause
cancer, birth defects, infertility or other reproductive
harm; or serious and permanent respiratory or other
injury.
Some examples of these chemicals are: lead from
leadbased paints, crystalline silica from bricks, concrete
and other masonry products and natural stone, arsenic
and chromium from chemicallytreated lumber. Your risk
from these exposures varies, depending on how often
you do this type of work.
To reduce exposure to these
chemicals, the operator and bystanders should work
in a well-ventilated area, work with approved safety
equipment, such as respiratory protection appropriate
for the type of dust generated, and designed to filter
out microscopic particles and direct dust away from
the face and body. Avoid prolonged contact with dust.
Wear protective clothing and wash exposed areas with
soap and water.
Allowing dust to get into your mouth,
eyes, or to remain on your skin may promote absorption
of harmful chemicals.
The tool is not intended for use by children, by debil-
itated persons or those who have received no instruc-
tion or training.
Children must be instructed not to play with the tool.
Take care to avoid concealed cables and pipes. Check
the area in which you are working beforehand, e. g.
using a metal detector.
Concealed electric cables or gas and water pipes pre-
sent a serious hazard if damaged while you are work-
ing.
Do not expose the tool to rain. Do not use the tool in
damp or wet locations.
Water can damage the tool and battery pack.
Ensure that the insert tools (drill bits, etc.) are equipped
with the appropriate connection end for the chuck
system in use and that they are locked in position cor-
rectly in the chuck.
A loose insert tool presents a risk of injury.
Check of proper battery seating in the tool.
If the battery is not properly inserted, it can drop out
when working and cause an injury.
Do not carry the tool by the depth gauge (the snaplock
connection may release unexpectedly).
Liquids
Caustic liquids may leak from defective batteries.
Avoid contact with these liquids.
In the event of contact with the skin, wash the area
affected with soap and plenty of water. Should the
liquid come into contact with the eyes, flush the eyes
with water immediately and subsequently consult a
doctor.
Obligation signs
Wear eye
protection
Wear ear
protection
Wear breathing
protection
Symbols used on the tool:
V .............. volts
—— _ _ _ .............. direct current
Waste material
should be
recycled.
The disposal of batteries
with general refuse is not
permissible.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070681 / 000 / 00