Hilti NURON VC 75-1-22, Руководство по эксплуатации

Страница: 11 / 40

*2284804*
2284804 English 7
Status Meaning
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
4 Technical data
VC 75-1-22
Weight 4.6 kg
(10.1 lb)
Rated voltage (DC) 21.6 V
Rated current input 16 A
Maximum volumetric flow rate (air) 35 ℓ/s
(9 liq. gal
US
/s)
Max. volume flow rate (end of hose)
82 m³/h (23 ℓ/s)
(2,900 ft³/h
(6 liq. gal
US
/s))
Max. vacuum 11 kPa (110 mbar)
(2 psi (1.6 psi))
4.1 Battery
Battery operating voltage 21.6 V
Weight, battery See the end of these
operating instructions
Ambient temperature for operation −17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature −10 ℃ … 45 ℃
(14 ℉ … 113 ℉)
5 Preparations at the workplace
Observe the safety instructions and warnings in this documentation and on the product.
The appliance may be operated only by authorized, trained personnel.
5.1 Installing clip 2
Install the clip prior to initial start-up.
▶
Push the clip into its mounts until the clip snaps into engagement.
Make sure that the holder for the shoulder strap is facing up.
5.2 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 5