![background image](http://html1.mh-extra.com/html/hilti/nuron-dsh-600-22/nuron-dsh-600-22_original-operating-instructions_2136368030.webp)
26
English
2284136
*2284136*
3
Description
3.1
Product overview, cut-off saw
@
Protective frame for battery
;
Main grip
=
Control switch
%
Water supply connection
&
Water flow regulating valve
(
Water line
)
Grip for guard adjustment
+
Curved water distributor with integrated wa-
ter nozzles
§
Cut-off wheel
/
Clamping flange with securing screw
:
Guard
∙
Direction-of-rotation arrow
$
Front grip
£
Latching switch, transport lock
|
Safety switch
¡
Assembly tool
Q
Liion battery
W
Release button
E
Charge-status and fault indicator, battery
3.2
Intended use
The product described is a hand-held cordless cut-off saw. It is designed for outdoor and indoor dry-cutting
or wet-cutting mineral or metallic construction materials and asphalt with abrasive cut-off wheels or diamond
cut-off wheels. To reduce the amount of dust produced by cutting,
Hilti
recommends wet-cutting or the use
of genuine
Hilti
accessories for dust extraction (such as the
DSH-DRS
).
Read and observe the instructions on safety and use in the operating instructions of the accessory products.
▶
Do not mount the cut-off saw in custom-built jigs such as frames on rollers or rails.
• For this product, use only
Hilti
Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti
recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only
Hilti
chargers of the type series stated in the table at the end of these
operating instructions.
3.3
Instructions for use
• To reduce the amount of dust produced when cutting, by preference use the wet-cutting method or work
with accessories for dust extraction such as the
DSH-DRS
.
• Do not cut right through the workpiece in one pass. Move the saw back and forward several times until
it gradually reaches the desired cutting depth.
• To avoid damaging the diamond cut-off wheel when dry-cutting, lift the wheel out of the cut for approx.
10 seconds every 30 to 60 seconds while the saw is still running.
• Resharpen a dulled diamond cut-off wheel (i.e. when no diamonds project from the segment matrix) by
cutting with the wheel in a very abrasive material such as sandstone.
3.4
Cut-off wheel specifications
Diamond cut-off wheels in accordance with EN 13236 are to be used with the product. Also bonded
reinforced cut-off wheels for different applications in accordance with ISO 603-15 and ISO 603-16 can be
used with the product.
The instructions for use and installation instructions issued by the cut-off wheel manufacturer must be
observed.
Содержание Nuron DSH 600-22
