Hilti NCT IS 045-A22, Руководство пользователя

Страница: 9 / 48

*2258525*
2258525 English 5
3 Description
3.1 Product overview 1
@ Cutting head
;
Manual piston return switch
=
Casing
%
Servicing and fault indicator (red LED)
&
Battery release button
(
Battery
)
Slot on both sides to fasten the Hilti retaining
strap
+
White LED to illuminate the working area
§
Control switch
3.2 Intended use
The product described is a cordless (battery-powered) electro-hydraulic cutting tool.
It is designed for cutting through cables made of copper (Cu), aluminum (Al) and steel (e.g. ACSR).
Before use of the power tool, all live cables or other items carrying electric voltage within the area in which
the user is working must be switched off. If this is not possible, the corresponding safety precautions for
working in the proximity of live cables or equipment must be implemented and observed.
▶ Use only Hilti lithium­ion batteries of the B 22 series with this product.
▶
Use only
Hilti
battery chargers of the C4/36 series for charging these batteries.
3.3 Possible misuse
• Do not use this hand-held product clamped in a fixed position or as a stationary device.
• Do not use the product in heavy rain or under water.
3.4 Charge status display
The charge status of the Li­ion battery is displayed after pressing the release button.
Status Meaning
4 LEDs light. Charge status: 75 % to 100 %
3 LEDs light. Charge status: 50 % to 75 %
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights. Charge status: 10 % to 25 %
1 LED flashes, the power tool is ready for use. Charge status: < 10 %
Battery charge status cannot be displayed while the control switch is pressed.
3.5 Items supplied
Cutting tool, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
Rated voltage 21.6 V
Weight in accordance with EPTA Procedure 01 4.0 kg
Max. cable diameter 45 mm
max. cutting capacity for steel-reinforced aluminum cable (ACSR):
1590 MCM (Falcon) 44.4 mm
(1 3/4 in)