Hilti JHT-H, Руководство оператора, Страница: 14 / 20

JHT-H
– User Manual REV0919
Page 12 of 18
USING THE JHT-H
WARNING
Ensure the machine is switched OFF before plugging in.
CAUTION
Ensure Chisel or Tile Smasher is correctly inserted and locked in position before
use.
1. Ensure Hammer/Breaker is secure and cannot rotate.
2. Position and angle before commencing work.
To change the angle:
a. Lift the handles to take the weight off lock mechanism.
b. Pull the brake lever to disengage the lock mechanism.
c. Lift/ lower the height of the handle to desired angle.
d. Release brake lever to re-engage the lock mechanism.
3. Switch on Hammer/Breaker with trigger
4. Refer to Hammer/Breaker Instruction Manual for more detail on operation and service
CAUTION
Never allow Hammer/Breaker or moil to overheat.
WARNING
Always switch off machine before unplugging.
SERVICING THE JACKHAMMER TROLLEY
Every Use:
▪
Inspect frame for damage.
▪
Ensure bolts are secure.
Every 3 Months:
▪
Adjust brake lever to eliminate free-play.
▪
Lubricate brake lever cable.
o
Drip light weight oil from the top of the cable so it runs through the cable housing.
▪
Grease the pivot axle.