![background image](http://html1.mh-extra.com/html/hilti/dsw-2005-ts/dsw-2005-ts_manual_2136364034.webp)
30
English
2235115
*2235115*
3. Use the control knob to set the operating mode to
Wire saw
and confirm your selection
with
.
Your setting is saved as the new basic setting on the DST WRC-CA wireless
remote control.
9
Sawing operations
9.1 Operating the wire saw
1. In the home screen, select the
Manual operation
tile.
2. Using the joystick, move the saw head up to tension the diamond sawing wire. Tension
the diamond sawing wire until the holder of the tensioning pulley is in the green zone.
3. Open the valve for the water supply at the saw cut.
4. To start the saw, press the
Start
tile.
▶
The green "Start" LED lights up.
Make sure that the tensioning pulley does not move into the red zone while
sawing is in progress. If the tensioning pulley does enter the red zone, pause
wire advance until the tensioning pulley is back in the green zone.
Содержание DSW 2005-TS
