8
English
2279864
*2279864*
W
Water collector (accessory)
E
Sealing washer for water collector (acces-
sory)
3.1.3 Carriage DD-HD 30
@
Hand wheel sleeve 1:1
;
Hand wheel sleeve 1:3
=
Eccentric pin (for locking the diamond core
drilling machine)
%
Shear pin
&
Hand wheel
(
Leveling indicator (2x)
)
Carriage lock
+
Supply cord guide
§
Adapter interface for DD AF-CA H
/
Carriage play adjusting screw (4x)
3.1.4 Vacuum base plate (accessory)
@
Vacuum release valve
;
Vacuum hose connector
=
Wheel assembly mount
%
Pressure gauge
&
Vacuum seal
(
Leveling screw (4x)
3.2
Intended use
The product described is an electrically powered diamond core drilling machine. It is designed for the rig-
based wet drilling of through-holes and blind holes in (reinforced) mineral materials. Hand-held use of the
diamond core drilling machine is not permitted.
▶
Always use a drill stand when using the diamond core drilling machine. The drill stand must be sufficiently
anchored in the base material by an anchor base plate or vacuum base plate.
▶
Do not use a hammer or other heavy object to adjustment the base plate.
▶
Operate the tool only when it is connected to a power source providing a voltage and frequency in
compliance with the information stated on the rating plate.
▶
Comply with the safety rules and operating instructions for the accessories used.
3.3
Bluetooth
®
This product has Bluetooth.
Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate
with each other over a short distance.
To ensure a stable Bluetooth connection there must be a clear line of sight between the connected devices.
Bluetooth functions of this product
Consult the operating instructions of the paired device for detailed descriptions of the Bluetooth functions.
• Service and status messages of the paired
Hilti
devices are shown on the display of the diamond core
drilling machine.
• Connection with a mobile terminal device via the
Hilti
Connect app for service functions and for
transmission of product-related analysis data.
Switching Bluetooth on or off
Hilti
products ship ex-works with Bluetooth deactivated. Bluetooth switches itself on automatically
during initial operation.
• To switch off, press and hold down the buttons
and
simultaneously for at least 10 seconds.
• To switch on, press the buttons
and
simultaneously.
Connecting products
The pairing with a Bluetooth-compatible
Hilti
device is sustained until the diamond core drilling machine is
paired to another
Hilti
device of the same type or Bluetooth is switched off. Pairing is also sustained even
when the products are switched off and then on again; paired products always automatically re-establish
their paired connection.
• To pair with a Bluetooth-compatible
Hilti
device or mobile device, with Bluetooth switched on simulta-
neously press the
and
buttons.
The time window for pairing with a Bluetooth-compatible
Hilti
device is 2 minutes. When the 2 minutes
have expired, the connection process will be canceled.
Содержание DD 250-CA
