Hilti DD 150-U, Руководство пользователя

Страница: 41 / 534

*434949*
434949 English 33
1st gear 2nd gear 3rd gear
Ø core bits (stand-
guided drilling,
wet) With water
collection sys-
tem 102 mm … 162 mm 28 mm … 87 mm 12 mm … 25 mm
Without water
collection sys-
tem 102 mm … 162 mm 28 mm … 87 mm 12 mm … 25 mm
Ø core bits (hand-
held drilling, wet) Without water
collection sys-
tem 121 mm … 131 mm 41 mm … 111 mm 8 mm … 36 mm
Ø core bits (hand-
held drilling, dry,
HDMU) With dust re-
moval system 122 mm … 162 mm 67 mm … 112 mm •/•
Ø core bits (hand-
held drilling, dry,
PCM) With dust re-
moval system 52 mm … 162 mm •/• •/•
4.6 Use of the machine with various items of equipment
Hand-held/
Mounted on the
drill stand Additional systems Core bit diameter Drilling direction
hand-held/dry With dust removal system 37 mm … 162 mm All directions
hand-held/wet Without water collection system 8 mm … 132 mm Not upwards
hand-held/wet With water collection system 8 mm … 62 mm All directions
on drill stand/wet Without water collection system 12 mm … 162 mm Not upwards
on drill stand/wet With water collection system 12 mm … 162 mm All directions
4.7 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Hand-held use Mounted on the
drill stand
Sound (power) level (L
WA
) 98 dB(A) 106 dB(A)
Uncertainty for the sound power level (K
WA
) 3 dB(A) 3 dB(A)
Sound pressure level (L
pA
) 87 dB(A) 93 dB(A)
Uncertainty for the sound pressure level (K
pA
) 3 dB(A) 3 dB(A)
Total vibration
Hand-held use Mounted on the
drill stand
Drilling in concrete (wet) (a
h, DD
) 7 m/s² 3.5 m/s²
Uncertainty (K) 1.5 m/s² 1.5 m/s²
Drilling with HDMU core bit in sand-lime block (dry) (a
h, DD
) 6.5 m/s² •/•
Printed: 09.08.2019 | Doc-Nr: PUB / 5069546 / 000 / 09