Hilti AG 125-A36, Оригинальная инструкция по эксплуатации

Страница: 13 / 22

24
• It is recommended that a dust removal system consisting of matched components, i.e. dust removal
hood and a suitable Hilti vacuum cleaner, are used for working on mineral materials such as concrete or
stone. These protect the operator and increase the life of the power tool and accessory tools used.
▶
Use only Hilti Li-ion batteries from the B 36 series with this product.
▶
Use only the Hilti battery chargers from the C4/36 series for these batteries.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
3.4 Temperature-dependent motor protection
The temperature-dependent motor protection system monitors current input and motor temperature and
thus prevents the power tool overheating.
If the motor is overloaded through application of excessive working pressure, the power tool’s performance
drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the tool and
then allow it to run under no load for approx. 30 seconds.
3.5 Guard with front cover 2
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
3.6 Dust hood for cutting: DC-EX 125/5" C compact hood (accessory) 3
When cutting mineral materials with diamond cutting discs, use the DC-EX 125/5" C compact hood.
CAUTION Use of this hood for working on metal is prohibited.
3.7 DG-EX 125/5" dust hood for grinding (accessory) 4
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
3.8 Consumables
Only discs of max. Ø 125 mm or Ø 150 mm, designed for a peripheral speed of 80 m/s and with a max.
thickness of 6.4 mm (grinding discs) or 2.5 mm (cutting discs) may be used.
Discs
Application Designation Material
Abrasive cutting disc Cutting, slitting AC­D Metal
Diamond cutting disc Cutting, slitting DC­D Mineral
Abrasive grinding disc Rough grinding AG­D, AF­D, AN­D Metal
Diamond grinding disc Rough grinding DG­CW Mineral
Diamond core bit Drilling in tiles DD-M14 Mineral
Suitability of discs for the equipment used
Item Equipment AC­D AG-D AF-D AN-D DG­CW DC­D DD-M14
A Guard X X X X X X X
B Front cover (in combina-
tion with A)
X X
C DG­EX 125/5" guard for
surface grinding
­ ­ ­ ­ X ­ ­
D DC­EX 125/5"-C com-
pact guard (in combina-
tion with A)
­ ­ ­ ­ ­ X ­
E Side handle X X X X X X X
F DC BG 125 hoop grip
(optional for E)
X X X X X X X
Printed: 14.09.2015 | Doc-Nr: PUB / 5246581 / 000 / 00