Descriptions
23/83
2.6.11
J5 - 3-phase motor connector
J5
is used to connect a 3-phase motor.
For identifying the connector on the board, see position
(17)
in section
Positions of interfaces and operating elements
J5
Number
Description
(1)
MOTA
(2)
MOTB
(3)
MOTC
Table 21: Pin assignment 3-phase motor connector J5
2.6.12
J6 - Brake chopper
J6
is used to connect a brake chopper.
For identifying the connector on the board, see position
(20)
in section
Positions of interfaces and operating elements
J6
Number
Description
(1)
VM
(2)
BRAKE_DRAIN to MOSFET
Table 22: Pin assignment brake chopper J6
Note:
Undervoltage shutdown of brake chopper: @9V ...15V.
NXHX 90-MC | Device description
DOC200602HW01EN | Revision 1 | English | 2021-02 | Released | Public
© Hilscher 2021