Isolated application execution with Docker
49/64
The following figure shows a possible usage of containers.
Figure 34: netPI block diagram
9.3
Working with Docker via the web GUI
This section describes
·
how to operate Docker via the portainer.io interface of the browser
·
how to run additional software on the Edge Gateway with Docker (using
the web server NGINX as an example).
9.3.1
The portainer.io interface
Tasks of the portainer.io interface
The portainer.io interface serves:
·
to add new containers
·
to provide functions for controlling the code execution such as
Start
,
Stop
,
Kill
,
Restart
,
Pause
,
Resume
, and
Remove
·
to configure the containers.
Starting the portainer.io interface for working with the containers
To start the portainer.io interface, proceed as follows:
Ø
Open the Edge Gateway Manager, if it is not already open.
For this purpose see
Calling the Edge Gateway Manager
[
}
page 20]
Ø
Click the tile
Docker Management
in the
Edge Gateway Manager.
.
netPI | NOIT-E-NPI3-51-EN-RE
DOC170801UM01EN | Revision 1 | English | 2017-09 | Released | Public
© Hilscher 2017
