Introduction
8/75
1.1.5
Reference to hardware, firmware, software and drivers
1.1.5.1
Hardware and firmware
This document relates to the following versions of hardware and firmware:
Devices with preloaded firmware
netHOST device
preloaded with
firmware
Order no.
Hardware
revision
Protocol
Firmware file
Firmware
(starting
from this
version and
higher)
NHST-T100-DP/DPM
1890.410/DPM
4
PROFIBUS DP Master
FT20V010.NXF
1.7.x.x
NHST-T100-CO/COM
1890.500/COM
4
CANopen Master
FT20V040.NXF
1.7.x.x
NHST-T100-DN/DNM
1890.510/DNM
4
DeviceNet Master
FT20V060.NXF
1.7.x.x
NHST-T100-EN/PNM
1890.840/PNM
2
PROFINET IO Controller
FT20C0V0.NXF
1.7.x.x
NHST-T100-EN/ECM
1890.110/ECM
2
EtherCAT Master
FT20E0V0.NXF
1.7.x.x
NHST-T100-EN/EIM
1890.820/EIM
2
EtherNet/IP Scanner
FT20G0V0.NXF
1.7.x.x
Table 2: Reference to devices with preloaded firmware
Device for loadable firmware
(Firmware not loaded in state of delivery of device):
netHOST device for
loadable firmware
Order no.
Hardware
revision
Supported protocols
Loadable
firmware file
Firmware
(starting
from this
version and
higher)
NHST-T100-EN
1890.800
2
PROFINET IO Controller
FT20C0V0.NXF
1.7.x.x
EtherCAT Master
FT20E0V0.NXF
1.7.x.x
EtherNet/IP Scanner
FT20G0V0.NXF
1.7.x.x
Table 3: Reference to devices for loadable firmware
Note:
For acting as master device, the
NHST-T100-EN
requires the
NXLIC-Master
license (order no.:
8211.000
). Make sure to order
the
NHST-T100-EN
device together with the master license, so that
it can be delivered with the license already loaded.
If necessary, a master license can also be ordered and installed
belatedly; instructions for this are provided in the operating
instruction manual
Configuration of LAN controlled master devices –
netHOST
.
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018
