hilscher netFIELD Compact X8M, Руководство пользователя

Страница: 55 / 136

Local Device Manager 55/136
Ø
In the Addresses dropdown-list, select Manual .
Figure 34: Manual IPv4 Settings
Ø
Enter the address parameters, then click Apply button.
Unmanaged Interfaces
The Unmanaged Interfaces section (4) lists virtual interfaces and their IP
parameters (IP address, current send/receive volumes).
· docker0 : Virtual interface (“bridge”) of the Standard Docker
·
Iotedge0 : Virtual interface (“bridge”) of the IoT Edge Docker
·
vethxxxxxxx : Virtual interface (“virtual Ethernet device”) of a container
in a Docker
· sit0 : Tunneling protocol (“Simple internet transition”) for using IPv6 over
an existing IPv4 connection.
Note:
The IP addresses of the “unmanaged interfaces” cannot be
changed here. If you want to change the pre-configured IP address
of the virtual interface of the Standard Docker (
docker0) or of the
IoT Edge Docker ( Iotedge0 ), e.g. because it conflicts with other IP
addresses in your company network, see section Docker Network
Settings [
}
page 81] for further information.
netFIELD Compact X8M | User manual
DOC220302UM01EN | Revision 1 | English | 2022-05 | Released | Public © Hilscher 2022