Descriptions and Requirements
60/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
3.6.3
Panel Cutout for Installing AIFX
In order to connect the AIFX detached network interface to a
PC card cifX
Mini PCI
and
Mini PCI Express
with cable connector Ethernet or fieldbus
(labeling „\F“), make sure that
the housing panel of the PC or of the
connecting device
has an appropriate cutout and holes for fastening the
AIFX.
In order to connect the AIFX detached network interface to a
PC card cifX
PCI-104
with cable connector Ethernet or fieldbus (labeling „\F“), make sure
that
the front plate of the PC cabinet
has an appropriate cutout and holes
for fastening the AIFX.
PC Cards cifX
Panel Cutout
Mini PCI; Mini PCI Express
at the housing panel of the PC
PCI-104
at the front plate of the PC cabinet
Table 36: Panel Cutout at the at the Housing Panel of the PC or at the front plate of the PC
cabinet
The panel cutout must be dimensioned sufficiently large for the interface,
display or control elements placed on the AIFX. Partial standard cutouts
can be used.
PC Cards cifX
AIFX
Panel Cutout and Holes
Required Cutout
for two RJ45 Sockets
Important!
The panel cutout layout must also cover
the LEDs COM 0 and COM1 at the AIFX-RE.
Standard cutout
D-Sub-15
Holes
2, distance between the holes 37,3 mm
CIFX 90-RE\F
CIFX 90E-RE\F
CIFX 90E-RE\NHS\F
CIFX 90E-RE\ET\F
CIFX 90E-RE\MR\F
CIFX 90E-RE\MR\ET\F
CIFX 104C-RE\F
CIFX 104C-RE-R\F
AIFX-RE
Further Information In the data sheet
MOD JACK – MJIM
[2], as well as in
section as in section
on page 92 or
on page 272.
Required Cutout
for two M12 Sockets
Important!
The panel cutout layout must also cover
the LEDs for channel 0 and channel 1 at the AIFX-
RE\M12, inlcuding the green and yellow Ethernet LEDs
as well as the communication LEDs COM 0 and
COM1.
Standard cutout
M12
Holes
2, distance between the holes 55 mm
CIFX 90-RE\F\M12
CIFX 90E-RE\F\M12
CIFX 90E-RE\NHS\F\M12
CIFX 90E-RE\ET\F\M12
CIFX 90E-RE\MR\F\M12
CIFX 90E-RE\MR\ET\F\M12
CIFX 104C-RE\F\M12
CIFX 104C-RE-R\F\M12
AIFX-
RE\M12
Further Information In the data sheet
99_3732_203_04.pdf
[4], as well as
on page 93 or
Required Cutout
for Dsub female Connector, 9 pin
Standard cutout
D-Sub-9
Holes
2, distance between the holes 25 mm
CIFX 90-DP\F
CIFX 90E-DP\F
CIFX 90E-DP\NHS\F
CIFX 90E-DP\ET\F
CIFX 90E-DP\MR\F
CIFX 90E-DP\MR\ET\F
CIFX 90E-2DP\ET\F
CIFX 90E-2DP\MR\ET\F
CIFX 90E-2DP\CO\ET\F
CIFX 90E-2DP\CO\MR\ET\F
CIFX 90E-2DP\DN\ET\F
CIFX 90E-2DP\DN\MR\ET\F
CIFX 104C-DP\F
CIFX 104C-DP-R\F
AIFX-DP
Further Information in section
on page 94 or on
Required Cutout
for D-Sub male Connector, 9 pin
CIFX 80-CO
CIFX 90-CO\F
CIFX 90E-CO\F
AIFX-CO
Standard cutout
D-Sub-9
