Device Drawings
93/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
5.4.2
Ethernet - AIFX-RE\M12
Only for CIFX 90-RE\F\M12,
CIFX 90E-RE\F\M12, CIFX 90E-RE\NHS\F\M12,
CIFX 90E-RE\ET\F\M12,
CIFX 90E-RE\MR\F\M12, CIFX 90E-RE\MR\ET\F\M12,
CIFX 104C-RE\F\M12, CIFX 104C-RE-R\F\M12.
green1 yellow1 COM1
flexibles
Folienkabel /
flexible
flat cable
green0 yellow0 COM0
X2
X3
X1
X0
M12-Buchse /
M12 Female Connector
Kanal 1 /
Channel 1 (CH 1)
Lightpipe
LEDs Kanal 0 und 1/ Channel 0 and 1
Ethernet LEDs grün, gelb /
green, yellow
Kommunikationsstatus-LEDs /
Communication Status LEDs
COM0, COM1 (rot/grün /
red/green)
M12-Buchse /
M12 Female Connector
Kanal 0 /
Channel 0 (CH 0)
Pinbelegung M12-Buchse
/
Pin Assignment
M12 Female Connector
Kabelstecker Ethernet /
Cable Connector Ethernet
(X2, 20-polig /
20 pin
)
Kabelstecker LED-Singale /
Cable Connector LED Signals
(X3, 10-polig / 1
0 pin
)
1
2
3
4
Figure 36: Ethernet M12 detached Network Interface (AIFX-RE\M12)
Note:
*Assembled device supports Auto Crossover Function. Note also: With loaded
EtherCAT Master firmware only the M12 channel 0 can be used, channel 1 is
deactivated. Beginning with the EtherCAT Master firmware version 3 channel 1 can be
reactivated if redundancy is activated. For Open Modbus/TCP with V2.3.4.0 and higher
both M12 channels can be used.
Figure 37: Ethernet M12 detached Network Interface (AIFX-RE\M12)
The meaning of the
LEDs COM0
and
COM1
and of the green and yellow Ethernet LEDs
(for channel0 and channel1) of the AIFX-RE\M12 corresponds to the description in
chapter
beginning from page 115.