hilscher 7763.200, Руководство пользователя

Страница: 46 / 72

Accessories 46/72
4.1.8 Using NXHX 6­RE or NXHX 52­RE as Extension Bus at host
interface
Figure 10: NXHX 51­ETM connected to NXHX 6­RE Board
For the setting of the X10 jumper on the NXHX 51­ETM required for
operating the NXPHX 6­RE or the NXHX 52­RE at the host interface, see
section
Host interface configuration jumper (X10) [
}
page 16].
4.1.9 Accessory cables and connectors for host interface
4.1.9.1 CAB­NXPCA­PCI
The CAB­NXPCA­PCI cable can be used to connect the X3 host interface
of the NXHX 51­ETM (see section
Host interface (X3) [
}
page 19]) with the
Hilscher NXPCA­PCI Card (see section Parallel Dual­Port Memory at Host
Interface [
}
page 45]) or other host devices.
CAB­NXPCA­PCI Value
Part number 4400.000
Cable length 45 cm
Connectors 68 pin socket connector
Table 51: Technical data CAB­NXPCA­PCI
4.1.9.2 CAB­NXEB5
The CAB­NXEB5 cable can be used to connect the X3 host interface of the
NXHX 51­ETM (see section
Host interface (X3) [
}
page 19]) with the
Hilscher NXPCA­PCI Card (see section Parallel Dual­Port Memory at Host
Interface [
}
page 45]) or other host devices.
CAB­NXEB5 Value
Part number 4400.001
Cable length 6.35 cm
Connectors 68 pin socket connector
Table 52: Technical data CAB­NXEB5
NXHX 51­ETM | Development Board
DOC120606HW06EN | Revision 6 | English | 2015­01 | Released | Public © Hilscher 2012 – 2015