hilscher 7763.200, Руководство пользователя

Страница: 45 / 72

Accessories 45/72
For the setting of the X10 jumper on the NXHX 51­ETM required for
operating the NXHX­SDRSPI device at the host interface see section
Host
interface configuration jumper (X10) [
}
page 16].
4.1.7 Parallel Dual­Port Memory at host interface
The NXHX 51­ETM can be accessed from the PC via the NXPCA­PCI Card
(order number: 7902.100), using the host interface as parallel dual­port
memory.
Figure 9: NXHX 51­ETM connected to NXPCA­PCI Board
For the setting of the X10 jumper on the NXHX 51­ETM required for
operating the NXPCA­PCI at the host interface, see section
Host interface
configuration jumper (X10) [ } page 16].
For further information about the NXPCA­PCI board, please refer to
the
User Manual NXPCA­PCI .
NXHX 51­ETM | Development Board
DOC120606HW06EN | Revision 6 | English | 2015­01 | Released | Public © Hilscher 2012 – 2015