Figure 2-5
Drill Template
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
5.
Attach the mounting base to the ceiling, and secure
them with supplied screws
Method 1
Method 2
Figure 2-6
Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to fix
the camera. For wooden ceiling, self-tapping screws
are required.
6.
Route the cables through the cable hole, or the side
opening.
7.
Align the camera with the mounting base, and
secure the camera on the mounting base.
Figure 2-7
Secure the Camera with Mounting Base
8.
Connect the corresponding cables, such as power
cord, and video cable.
9.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
