Hillstone A200 Series, Справочник по аппаратуре

Страница: 12 / 27

12
Attribute Description
Short-haul
Multimode
Optical
Module
(850nm)
Medium-
haul Single-
mode
Optical
Module
(1310nm)
Long-haul
single-mode
optical
module
(1310nm)
Medium-haul
Single-mode
Optical
Module
(1310nm)
Long-haul
Single-mode
Optical
Module
(1310nm)
Long-haul
Single-mode
Optical
Module
(1550nm)
Ultra-long-
haul Single-
mode Optical
Module
(1550nm)
Central
Waveleng
th
850nm 1310nm 1310nm 1550nm 1550nm 1310nm 1550nm 1550nm
Optional
Original
Hillstone
Optical
Module
TRAN-
SX
TRAN-
LX10
TRAN-
LX40
TRAN-
LX80
TRAN-
LX40
TRAN-LX80
Notes: The original Hillstone optical module should not be used together with optical modules from
other manufacturers, otherwise some errors may occur.
If an SFP copper module is applied to an SFP port, you should use a crossover or straight-through
cable (i.e. standard Ethernet cable). Attributes for the SFP copper module are shown in the table
below:
Table: SFP Copper Module Attributes
Attribute Description
Connector RJ-45
Port Standard Auto-MDI/MDIX (crossover cable and straight-through cable
autosensing)
Maximum
Transmission
Distance 100m
Negotiation
Mode 10/100/1000Mbps autosensing (some only supports 1000Mbps)
Full/half-duplex