8
9
Step 1: Login
There are multiple ways to log in to the WK-1-O. Please see 2 options below:
Option 1: Using Ethernet cable
Connect a computer to the WK-1-O through an Ethernet cable. Enter 192.168.1.250 into the
address bar of your web browser. You should see a login page. In the username box, type pakedge.
In the password box, type pakedgea and click Login.
NOTE:
If your computer is not set to the default IP scheme of the WK-1-O (192.168.1.X), you must
first configure the TCP/IP settings on your computer to log in to the WK-1-O through a web
browser.
Configuring the Access Point
Using Windows 7
Under Control Panel – Network and
Internet, click on
View Network Status
and Tasks.
On the left panel, click on
Change
Adapter Setting
s and right-click
Local
Area Connection.
Select
Properties.
Select
Internet Protocol Version 4
(TCP/IPv4)
and click
Properties
.
Select
Use The Following IP Address
and enter the following information:
IP Address:
192.168.1.10
Subnet Mask:
255.255.255.0
Additional settings can be left blank.
Click “
OK
” and “
Close
”
Following page will display when logged in: