Hills PACOM StIP-16PDX, Руководство пользователя

Страница: 63 / 97

Part 3 - Configuration
63
Face Detection
When face detection event occurs in the selected
camera, the area that the face is detected displays on
the screen.
•
No.
: Specify which camerass to take Face Detection to.
• Sensitivity. : Set sensitivity settings between 1 (Low)
and 5 (High).
• Max. Detect Count : Set the maximum detected
number of face as 8 or 32.
When you set the Max. Detect Count as 32, the
sensitivity feature will be disabled.
• Min. Face Size : Select 120 x 120, 150 x 150, 180 x180,
210 x 210 or 240 x 240.
•
Actions
: Specify which actions to take when a Face
Detection event occurs.
-
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to
Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
- Alarm-Out : Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
- Notify : Configure to be notified of events by Mail,
LAN1 through 5, SNS, and/or Alert Window.
-
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
-
Event Monitoring
: Selects the cameras to monitor
when an event occurs.
• In order to use the Callback feature, the NVR
must be registered on the remote program.
• In case of the camera that not supports face
detection event, the face detection feature will
be disabled.
• Ignoring Interval : The system does not produce
event log entries or issue remote notifications
regarding face detected for the time specified
after the initial motion was detected. Set the value
between 1 sec and 5 secs or choose
Never .
Device Setup
Refer to the
Menu Use on page 36
for basic
information on using the Setup menus.
Alarm-Out
Select the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select icon to delete the schedule.
•
Dwell Time
: Select a value between 5 secs and 15
mins as the alarm-out duration.
•
Title
: Designate a name for the alarm-out.
• Range : Change the schedule time frame.
•
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On Alarm-out is always on.
Off Alarm-out is always off.
• Channels : Configure alarm-out port and beep
settings.