Quick Guide
Eyeball Camera
10
10
To view and configure the camera via LAN (Local Area Network), you need to
connect the network camera in the same subnet with your PC. Then install
the PC software to search and change the IP address of the network camera.
The following figure shows the cable connection of a network camera and a
PC:
Figure 4-1 Wiring over LAN
Set the IP address of the camera for accessing via LAN.
Steps:
1.
Use PC client software to detect the online devices. Please refer to the
user manual of PC client software for detailed information.
●
Search online devices automatically
After launching the PC software, it automatically searches the online
devices every 15 seconds from the subnet where your computer is located.
It displays the total number and information of the searched devices in the
Online Devices interface.
Setup using remote software
4
