- 17 -
Switching on for the First Time
Your HSMX-200 needs to be tuned to channels in your region. When it is connected and
switched on for the first time the HSMX-200 will start in Auto Scan mode.
1. Turn on your TV set.
2. Turn on the HSMX-200 by pressing the power key on the front panel or pressing
STANDBY
on the remote control. The green ON LED will light up.
3. The “Auto Scan” menu will appear. Use the directional keys
▲
,
▼
,
◄
and
►
on the remote
control to select your region and then arrow down to Start Scanning, press
ENTER
to
automatically scan and place into memory all services transmitted in your region.
1. When the receiver states “Scan Complete”, it will
EXIT
automatically.
2. Digital television programmes are now available.
NOTE
If Auto Scan does not automatically appear, refer to the following Section on Manual
Scan / Retune.
