Hills HD94003C, Руководство пользователя

Страница: 9 / 31

7
ASSEMBLY AND PARTS LIST
Learning Remote instruction
The Set Top Box Remote Control can be set to switch your TV OFF and ON. Follow
these simple instructions to program your Set Top Box remote Control.
1. You will need both the Set Top Box Remote Control and the TV Remote Control,
make sure both have operational batteries installed.
2. To place the Set Top Box Remote Control into Learning Mode press and hold
down the HD94003C SET button for around 3 seconds, the indicator light will
illuminate brightly. Once illuminated you can let go of the SET button. (NOTE: If
another key is not pressed within 15 seconds the Set Top Box Remote Control will
exit Learning Mode.)
3. Lay both the HD94003C Remote Control and the TV Remote control on a flat
surface. Orientate both remotes so that the infrared receivers are facing one
another within a distance of 1cm to 4cms. Press the blue power key on the
HD94003C remote control until the red light is blinking. Press and hold down the
POWER button of the TV Remote Control until the indicator light on the Set Top Box
Remote Control until the red light on the HD94003C remote is solid, then release
the TV POWER button on the TV Remote Control.
You are now ready to use the Set Top Box remote Control to turn the TV ON and
OFF by pressing the power button in the TV section of the Set Top Box remote
control on the top right corner of the remote.