3
Nozzle Replacement
Fig. 1
Fig. 4
Fig. 2
Fig. 5
Fig. 3
1. Nozzle Replacement
Your new Nozzle comes with two spray
patterns. One for cone spray and one for strip
spray pattern. Choose the one suitable for your
particular spraying application.
1.1
To fit strip spray, remove the green Nozzle
from the grey attachment cap. Refer to
(
Fig. 1 and 2
).
1.2
Remove the nozzle from cap. Refer to
(
Fig. 3
).
1.3
Re-assemble the two green halves of
Nozzle and store safely.
1.4
Place strip spray Nozzle into rear of
attachment cap along with filter.
Refer to (
Fig. 4
).
1.5
Replace assembly onto end of Nozzle
elbow. Refer to (
Fig. 5
).
Note:
Do not use hand tool to tighten.
