With the compressor positioned on a level surface,
check that the oil level meets the
red dot on the sight glass.
Top up as necessary using the following:
Remove re
d
cap - screw anti-clockwise
4
CAUTION - please read and understand the following instructions before use.
CAUTION - ONCE YOU HAVE CORRECTLY FILLED THE COMPRESSOR
WITH LUBRICANTS, THE COMPRESSOR MUST BE KEPT UPRIGHT AND
LEVEL AT ALL TIMES. ENSURE THE COMPRESSOR IS USED ON A NON-SLIP
FLOOR, PREFERABLE SAT ON ANTI-SLIP MATTING. IF THE COMPRESSOR
IS TO BE MOVED OR TRANSPORTED FOR STORAGE OR MAINTENANCE,
ENSURE ALL LUBRICANTS ARE DRAINED FIRST.
1. Oil Level
Slowly squeeze the
A73
crank oil into the
exposed hole until the lubricant level meets the
red dot in the sight glass
this should use more or less
the complete bottle
DO NOT MIX CRANK OIL AND SILICONE OIL AND DO NOT OVERFILL
After an oil change or fill...
Leave the oil to settle for 5 mins, if the oil level drops
below the red dot apply more oil until the oil level
is maintained
Replace the red cap until finger tight
Set Up
