Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 47

Страница: 47 / 178

2.1 Floor Lock Brakes Malfunction

Chapter 2: Troubleshooting Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 2 - 17

2.1

Floor Lock Brakes Malfunction

1. The floor lock brake (A) is firmly attached to the base frame (B), and no

screws (C) are loose (see figure 2-7 on page 2-17).

Figure 2-7. Floor Lock Brakes and Casters

Yes

↓

→

Remove any loose screws (C), apply blue Loctite®

adhesive

(P/N SA3618), and install the screws (C). If this solves the
problem, go to “Final Actions” on page 2-16. If not, go to step 2.

2. Raise the foot end siderail, and press down on the floor lock pedal (D).

The floor lock brake (A) moves down smoothly and raises the caster (E)
off the floor.

Yes

↓

→

Replace the floor lock brake (A) (refer to procedure 4.1).

3. Use the unlocking lever (F) to release the floor lock brake (A).

The floor lock brake (A) releases easily and lowers smoothly to allow the
bed to rest on the caster (E).

1. Loctite® is a registered trademark of Loctite Corporation

m259_009

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 47 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: