4
www.hillrom.com
7EN160166 Rev. 11 • 2020
Before lifting, keep the following points in mind:
• A responsible person within your organization should decide on a case-by-case basis whether one or more caregivers are
needed.
• Ensure that the sling selected meets the patient’s needs with reference to model, size, fabric and design.
•
The total maximum load for a lift system is always determined by the product in the system with the lowest specified
maximum load.
• For safety and hygiene reasons, use individual slings.
• Plan the lifting operation so that it can be done as safely and smoothly as possible.
• Check that the lifting accessory hangs vertically and can move freely.
• Although the Liko sling bars are equipped with latches, special caution must be exercised. Before the patient is lifted from
the underlying surface, but when the straps are fully extended, make sure the straps are correctly connected to the sling
bar hooks.
• Make sure the patient is sitting securely in the sling before transferring to another location.
• Never lift a patient higher off the underlying surface than is needed to complete the lifting and transfer procedure.
•
Do not use the handles to lift! Excessive force on the handles can cause the sling to tear.
• Never leave a patient unattended during a lifting situation.
• Make sure that the wheels on the wheelchair, bed, gurney, etc., are locked during the lifting/transfer operation.
• Always work ergonomically. Use the patient’s ability to actively participate in the operations.
• When the sling is not being used, do not place in direct sun light.
•
It is recommended to remove the sling after the transfer.
Incorrect attachment of sling to sling bar may cause severe injury to the patient.
Manually turning the patient in bed may cause injuries to the caregiver.
PATENT www.hillrom.com/patents
May be covered by one or more patents. See above Internet address.
The Hill-Rom companies are the proprietors of European, US, and other patents and pending patent applications.
Product Changes
Liko’s products undergo continuous development, which is why we reserve the right to make product changes without prior
notice. Contact your Hill-Rom representative for advice and information about product upgrades.
Design and Quality by Liko in Sweden
Liko is quality certified according to ISO 9001 and its equivalent for the medical device industry ISO 13485.Liko is also certified
according to environmental standard ISO 14001.
Notice to Users and/or Patients in EU
Any serious incident that has occurred in relation to the device, should be reported to the manufacturer and the competent
authority of the Member State in which the user and/or patient is established.
Safety Instructions
Medical Device Class
I
Product
