Hill-Rom CareAssist P1170, Руководство по обслуживанию

Страница: 44 / 197

Initial Actions
Chapter 2: Troubleshooting Procedures
Page 2 - 2 CareAssist™ Bed Service Manual (man330)
Initial Actions
Use Initial Actions to gather information from operators concerning problems
with the CareAssist™ Bed. Note the symptoms or other information
concerning the problem that the operator describes. This information helps
identify the probable cause.
1. Someone who can explain the problem is available.
Yes No
↓ →
Go to “Function Checks” on page 2-4.
2. Ask this person to demonstrate or explain the problem. The problem can be
duplicated.
Yes No
↓ →
Go to “Function Checks” on page 2-4.
3. The problem is a result of improper operator action.
Yes No
↓ →
Refer to table 2-1 on page 2-2, or go to “Function Checks” on
page 2-4.
4. Instruct the operator to refer to the procedures in the CareAssist™ Bed.
Perform the “Function Checks” to ensure proper operation of the
CareAssist™ Bed.
Problem/Solution Table
If the problem can be easily identified, use the following table to determine the
appropriate troubleshooting procedure.
Table 2-1. Problem/Solution Table
Problem Solution
No Functions Work RAP 2.1
Lockout Malfunction RAP 2.2
Hilow Malfunction RAP 2.3
Knee Section Malfunction RAP 2.4
Head Section Malfunction (excluding Automatic Contour) RAP 2.5
Battery Backup Malfunction RAP 2.6
Foot Section Malfunction RAP 2.7
Trendelenburg/Reverse Trendelenburg Malfunction RAP 2.8