Hill-Rom CareAssist Bed P1170, Руководство пользователя

Страница: 28 / 54

24
Scale (B Model and Newer Beds)
The scale system for the CareAssist™ Bed has an accuracy of 1% or
2.2 lb (1 kg), whichever is greater and an operating range of 0 lb to
400 lb (0 kg to 181 kg). The scale display and controls are located on
head end siderails.
The scale is very sensitive. The weight reading will be most accurate if
the bed is not touching anything. This includes the headwall, lines such
as pendant controls, ventilators, or drainage bags.
Bed Setup
For best results, do as follows before you put the patient on the bed:
1. Make sure the bed is plugged into electrical power.
2. Put all linens, blankets, pillows, equipment, and other items on
the bed. A list of these items posted near the bed may be helpful
for future reference.
3. Make sure none of the items on the bed are touching the
headboard.
4. Make sure the bed is not touching anything that could affect the patient weight (headwall, lines such
as pendant controls, ventilators, or drainage bags).
5. Zero the scale, see “Zero the Scale” on page 24.
The scale system is now ready to weigh.
Scale Display On/Off
Press the Weigh control. The scale display becomes active and shows 4 dashes "----," and the
scale controls can be used. The scale display will automatically turn off after 3 minutes of no
activity.
Zero the Scale
The bed must be zeroed before the patient is put on the bed.
1. Make sure all linens, pillows, and equipment are on the bed.
2. Press the Weigh control. Wait for two beeps to sound.
3. Press and hold the Zero control until the Hands Off indicator flashes.
The display will show 00.0.
Weigh the Patient
1. Make sure of these:
• All items defined in the “Bed Setup” section are accounted for.
• No drainage bags or equipment has been added.
• The patient is lying still and is centered on the mattress.
2. Press the Weigh control until the Hands Off indicator flashes. The weight will show in either pounds
(lb) or kilograms (kg).
B-model beds
C-model and newer beds