PAGE 5
Connections
The RPX-2300 uses the below connector types, for which the pin assignment must comply with the
following specification. Always make sure to use good connectors and cables to ensure proper opera-
tion. Balanced connections are to be preferred over unbalanced connections where applicable and
feasible. Avoid unbalanced connections exceeding 2m of cable length.
1-conductor shielded cable
(for unbalanced connections)
red
shield
2-conductor shielded cable
(for balanced connections)
red
shield
black
3
1
2
plug
side
3
1
2
cable
side
red = 2
black = 3
shield = 1
red = 2
shield = 1+3
2
3
1
3
1
2
3
1
2
cable
side
plug
side
red = 2
black = 3
shield = 1
red = 2
shield = 1+3
XLR male
XLR female
CABLE Types
Structure
Balanced
connection
Unbalanced
connection
PHASE switch. Allows to invert the relative output (180 degress phase change).
MUTE switch. Allows tu mute every output individually.
SUBWOOFER XOVER FREQUENCY control. This control sets the crossover frequency
between the subwoofer and low frequency bands from 10Hz to 215Hz .
POWER switch. Switches the unit on and off. Make sure to switch the unit off when not in use.
15
16
Technical Specifications
Signal/Noise......................
＞
91dB (
unwgtd 22Hz-22KHz
)
Crosstalk Damping............................................
＞
92dB
THD......................................................
＜
0.01% (Line)
Frequency response.................................20Hz – 20 kHz
AC IN......................................AC115V/230V~ 50/60Hz
Power consumption.......................................max. 20W
Dimensions....................W483(427)xH44.5xD162.0mm
(parentheses = without rack ears)
Weight................................................................2.30k
g
Maintenance and warranty
While we have chosen the best components to make this product as rugged and reliable as possible,
some parts in audio products (potentiometers, faders, switches) are subject to wear which is a
matter of operation cycles, and not of time. While providing a full time-based warranty according to
the country’s of purchase requirements on the function of the electronic circuitry, we hence have to
limit the warranty on such electro-mechanical parts to 90 days from the date of purchase.
In many cases, malfunction of electro-mechanical parts occurs due to dust contamination, which may
require cleaning of such parts. As the inside of such parts is not accessible, a common practice is to
use cleaning fluids in the shape of sprays. Please be reminded that many of such fluids contain chemi-
cals which may wash away the dust but at the same time corrode or damage contact surface and
may cause cosmetic damage to other parts. We hence explicitly exclude any claims for exchange of
damaged part due to mechanical or chemical impact.
14
13
USER MANUAL - RPX2300 ACTIVE XO
Содержание RPX-2300
Страница 1: ...RevA 04 2017...