Hill Audio LMD-1402FX, Руководство пользователя

Страница: 4 / 12

PAGE 3
QUICK START, Part 1
STUDIO QUICK START – PLUG IN A MICROPHONE AND HEAR IT THROUGH YOUR POWERED STUDIO MONITORS
Before we go through each feature on the mixer, we'll show a few
common setups so that you can begin using your mixer right away.
In the
fi
rst example, we’re going to connect a microphone and listen
to it through powered studio monitors. Be sure to follow the direc -
tions so that you don’t hear loud feedback through your speakers!
1. Turn the CTRL RM|PH knob (under the effects) all the
way down, and the GAIN control on channel 1 (top left) all the
way down.
2. Plug your powered studio monitors into the CTRL RM OUT left
and right. Switch them on if you need to. (You can also follow
this example using headphones.)
3. Turn the LEVEL control on channel 1 up about half way.
4. Plug your microphone into the MIC input on channel 1.
5. If you’re using a condenser microphone, switch on the
PHANTOM POWER function (top right). If you’re using a
dynamic mic, or don’t know which type you’re using, leave
phantom power off.
6. Turn the MAIN MIX fader up to 0 (¾ of the way up).
7. Turn the GAIN control on channel 1 up about ½ way. If the
PEAK light
fl
ashes red, turn the gain back down a bit.
8. Slowly turn up the control room level (CTRL RM|PH) while
speaking into the microphone.
You should hear your voice through the speakers. Don’t hear
anything? Here are a few things to check:
• Are your speakers on? Are their level controls turned up?
• Do you need to switch phantom power on? Look at the mark-
ings on your microphone. If it says “condenser” then Phantom
Power should be switched on. If it says “dynamic” then leave
it off, although phantom power won't damage a dynamic mic.
• Are the level and gain knobs turned up on channel 1? Are the
Main Mix and Control Room levels turned up?
• If you only plugged in one speaker, make sure that the PAN
control is in the center.
• If the meters above Main Mix are moving, then your problem is
with the speakers. If the meters aren’t moving, something isn’t set
correctly on the mixer.
ADD REVERB
Now that we have signal running through the mixer, let’s try out the
effects. Picking up where we left off above:
1. Turn the PRESET knob to #5, “RV Plate.”
2. Turn up the FX RETURN knob about ½ way up.
3. Turn up the AUX2 control on channel 1 and speak through the
microphone. You should see the green light next to the preset
knob light up and hear reverb on your voice.
4. Turn the Preset knob to hear the other presets.
PLAY BACK FROM YOUR COMPUTER OR
PORTABLE DEVICE
Next, we're going to play back from a line level device like a
computer, smartphone, keyboard, or MP3 player.
1. If still set up as above, turn down the LEVEL control on channel
1. Keep the Main Mix and Control Room levels up.
2. Turn down the Level control for stereo channel 9-10.
3. Plug your computer, smartphone, keyboard, or MP3 player into
the LINE INPUT for channels 9 and 10. You'll need ¼" cables,
either balanced or unbalanced will work.
4. Turn up the Level for channel 9-10.
USER MANUAL - LMD1402FX AUDIO MIXER