Hill Audio IMA-400 V2, Руководство пользователя

Страница: 14 / 24

USER MANUAL - IMA400V2 INSTALLATION MIXING AMPLIFIER
PAGE 13
67
66
68
69
70
Transport Controls. In Media play mode, the 4 transport control buttons allow you to start and
pause a track, and further skip to the next track or back to the beginning of the current track.
These controls are inactive in FM mode.
Source button. Toggles the program source between Media play and FM Tuner. If FM Tuner is
chosen as the program source, the display’s FM Mode indicator (62) is lit while the media
replay related indicators (63/64/65) are disabled. Further, the media replay related user
interface elements (48/49/50) are disabled and the functional assignment of the navigation
controls (45/46) is changed.
Mute button. Toggles between muted and un-muted output of the media player.
Volume control (up/down). Allows you to set the required audio volume of the media player.
FM preset station buttons. Allows to remotely activate the stored FM station presets. These
buttons only work in FM mode and are disabled in Media play mode. Note that manual tuning
via the IR remote control is not possible.
Remote Control Elements
This unit includes an IR (infrared) remote control. For proper operation, a line of sight between the
remote control and the sensor on the unit (51) is required. The IR remote does only control the basic
functions of the media player section and as such adds convenience to the operation, but does not
replace the front panel control on the unit itself.
Bluetooth Replay (only versions with built-in BT receiver)
The IMA-400V2 is optionally available with built-in Bluetooth module (version IMA-400V2B). This
module can not be retrofitted and the availability of the Bluetooth-enabled version might be subject to
territorial restrictions.
To connect a Bluetooth source like a smartphone or tablet to the IMA-400V2B, follow the below
procedure:
Press the SOURCE button (52) until the display shows “AUX-BT” in the display area (59)
Activate BT on the source device (phone, tablet)
Search /(Scan) for Devices on the source device
Select "Bluetooth Board" and confirm connection request
Wait for single beep from the IMA-400V2B
The devices are now paired the IMA-400V2B is ready to receive audio via BT
Note: Only one device can connect - once a device is connected, the BT board will not appear on the
device scan of any other device.
To disconnect, simply do the following:
Tap on existing BT connection in your source device
Wait for dual-tone beep from the IMA-400V2B
The devices are now unpaired and the IMA-400V2B is ready to be paired with a different device.
Please note that the maximum distance of operation between your source device and the IMA-
400V2B depends on many factors, such as other interfering signals, the position of the IMA-400V2B
in the room, the position of the source device in the room, and the antenna/bluetooth hardware
design of the source device. While Bluetooth shall work as a rule-of-thumb up to 10m distance,
certain hardware combinations, geometrical setups or the presence of interfering signals can reduce
this significantly. The manufacturer of this device does not grant any specific operating distance.