HIKVISION W316L, Быстрый старт, Страница: 17 / 28

Ex
Explosion-proof Dome
·
Quick Start Guide
9
1) Hang the safety rope to the speed dome and the hook on the bracket.
2) Route the cables of the speed dome through the bracket and connect the
corresponding cables.
3) Hang the speed dome to the bracket by aligning the holes of bracket with the
screws and move the speed dome downward to secure the speed dome as
shown as Figure 2-9.
Figure 2-9 Install Bracket to Installation Plate
7. Secure the bracket by putting in the flat washer and the spring washer. Then tighten
the gland nut.
Explosion-proof Junction Box
(Optional)
Figure 2-10 Secure the Bracket
8. Remove the protective film on the bubble after the installation is finished.
2.3.3 Pendant Mounting
Before you start:

Make sure the ceiling is thick enough to withstand the expansion screws.

Make sure the ceiling must be strong enough to withstand more than eight times
the weight of the dome and its accessories.

There must be enough space for installing the explosion-proof dome and its
accessories.

Make sure the speed dome is power off before connecting the cables.
Steps: