Thermometric Network Bullet Camera User Manual
36
Ethernet (PPPoE) function.
Steps:
1.
Enter the PPPoE Settings interface:
Configuration >Advanced Configuration > Network > PPPoE
Figure 5-8
PPPoE Settings
2.
Check the
Enable
PPPoE
checkbox to enable this feature.
3.
Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
4.
Click
Save
to save and exit the interface.
Note:
A reboot is required for the settings to take effect.
5.3.4
Configuring DDNS Settings
Purpose:
If your camera is set to use PPPoE as its default network connection, you can use the
Dynamic DNS (DDNS) for network access.
Before you start: