HIKVISION UD.6L0201D2044A01 Скачать руководство пользователя страница 68

Страница: 68 / 172

Network Camera User Manual

Click

Save

to save and exit the interface.

Note

A reboot is required for the settings to take effect.

7.1.4

Configuring Port Settings

Purpose:

You can set the port No. of the camera, e.g., HTTP port, RTSP port and HTTPS port.

Steps:

Enter the Port Settings interface,

Configuration >

Network > Basic Settings >

Port

Figure 7-7

Port Settings

Set the

HTTP port, RTSP port, HTTPS port and server port of the camera.

HTTP Port

: The default port number is 80, and it can be changed to any port No.

which is not occupied.

RTSP Port:

The default port number is 554 and it can be changed to any port No.

ranges from 1 to 65535.

HTTPS Port:

The default port number is 443, and it can be changed to any port

No. which is not occupied.

Server Port:

The default server port number is 8000, and it can be changed to

any port No. ranges from 2000 to 65535.

Click

Save

to save the settings.

Note

A reboot is required for the settings to take effect.

Содержание UD.6L0201D2044A01













































































































































































Результаты поиска

Содержание UD.6L0201D2044A01

Отзывы:

HIKVISION UD.6L0201D2044A01, Руководство пользователя, Страница: 68 / 172

Результаты поиска

Содержание UD.6L0201D2044A01

Отзывы: