HIKVISION TurboHD, Руководство пользователя, Страница: 5 / 14

1.3 Overview of Bullet Camera
Power Cabl (12 V DC)
Video Cable (TVI)
Video Cable (CVBS)
Mounting Base
Main Body
Lens
Figure 1. 2 Overview of Bullet Camera
Installation Chapter 2
Before you start:

Make sure that the device in the package is in good
condition and all the assembly parts are included.

Make sure that all the related equipment is power-off
during the installation.

Check the specification of the products for the
installation environment.

Check whether the power supply is matched with
your power output to avoid damage.

Make sure the wall is strong enough to withstand
three times the weight of the camera and the
mounting bracket.

If the wall is cement, insert expansion bolts before
you install the camera. If the wall is wooden, use
self-tapping screws to secure the camera.

If the product does not function properly, contact
your dealer or the nearest service center. Do not
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Turret Camera
Steps:
1. Stick the drill template on the ceiling.
2. Drill the screw holes and cable hole (optional) on
the ceiling according to the supplied drill template.
Note:
Cable hole is required when adopting ceiling outlet to
route the cable.
120°
Screw Hole
Screw Hole Screw Hole
Figure 2. 1 The Drill Template
3. Loosen the screw to remove the clip plate and take
off the main body.
Screw
Clip Plate